Call Us On : 01922 405 903
0 items in cart
Total:  £0.00

GAVITA MASTER CONTROLLERS

GAVITA MASTER CONTROLLERS
Stock Status:   In Stock
Product Brand:   Gavita
Product Code:  
Please Choose From The Options
£97.95
You Will Earn 97 points which is the equivalent of £4.85
Send to a friend

ECM1

The Gavita Master controller EL2 has two outputs for optional External Contactor Modules (ECMs). These industry grade contactor units can switch a load up to 15 amps of accessories during either lights on or lights off period. Using the ECMs you can switch, for example, your humidifier, heating, CO2 equipment and watering systems. As the ECMs are steered by a low voltage signal you can even locate them close to the accessories themselves, enabling easy installation and optimal flexibility.

Features & Benefits

  • plug playPlug & play accessory, max 2
  • One for lights on / one for lights off
  • Follows main channel, LED indication
  • Switched off at temp shutdown / mains loss
  • Uses low voltage for connection to controller
  • Versions: US120-US240-EU-UK-CH-AUS
  • Rated 15A AC1 (unless lower local outlet power)
  • CE-logo 75pxcertified

Lights on:

  • Watering system
  • CO2 systems
  • Air conditioning
  • Extra fans / circulation fans

Lights off:

  • Heating / floor heating
  • Dehumidifier
  • Warning lights (night phase)

Specifications

  • ECM Voltage:120-240V
  • ECM Current:15A AC3
  • ECM Switch type:DPST (Double pole, single throw)
  • ECM AC terminals:Male and female plug (depending on market and voltage), 40 cm / 1’ 4” cords
  • ECM Steering Input:Low voltage from controller, cage clamps
  • ECM On-indication:Blue LED
  • Warrenty:3 years

Gavita Master controller EL1 or EL2

      EL1 For 40 ballasts EL2 For 80 Ballasts
Lighting control at your fingertips

Using a Gavita Master controller to control your e-series fixtures offers you maximum control, ease of use, plug and play installation and safety. Just connect the controller cables to the fixtures with the included T-splitter (see diagram), set the dials on the fixtures to EXT (External control), plug the controller and the fixtures directly into mains and you are set to go.

The controller can switch all the interconnected fixtures on and off with its internal timer, adjust them to your required output level (in percentage or exact output power) and even simulate sunrise and sunset to gradually adjust the climate in your grow room when your lights go on or off. This electronic controller replaces expensive lighting timers and contactors while preventing ballast current in-rush when switching on your lights.

Two very important features are the autodim function and emergency shut-down. When the temperature in your grow room rises beyond the control level of your climate control your crop can be damaged beyond recovery. The temperature probe senses this and will automatically dim the lights to not overshoot your safe temperature, and maintain it. The display and warning LED indicate when this happens, and also indicate if this has happened while you were away so you can correct the problem. If for any reason your climate control completely fails and the temperature rises to unacceptable levels the system will perform an emergency shutdown of all connected equipment. The alarm contact of the controller can be connected to your alarm system for instant notification.
You can connect all your e-series fixtures to one controller.

Features & Benefits

plug play
  • No need for a switchboard
  • No high inrushes (ballast is always stand-by)
  • Easy and safe installation (low voltage device)
  • Protected against shortcuts
  • Double temperature safety feature (autodim/auto shutdown)
  • EL1 For 40 ballasts EL2 For 80 Ballasts
  • For DigiStar and Pro-lines e-series, incl. LEP
  • Sunrise/sunset built in (0-30 mins)
  • Show output in % or Watts
  • Celsius or Fahrenheit and 24 hr/AM/PM
  • Calibrate temperature sensors
  • CE-logo 75pxcertified

Specifications

  • 24 hour timer (on/off):Yes
  • Set output level:50-115%
  • Select ballast type:400/600/750/1000W
  • Show output as W or %:Yes
  • Auto-dim at set temp:Yes
  • Auto shutdown at set temp:Yes
  • Sunrise / sunset period:Yes
  • Outputs:1 (main)
  • Number of ballasts per output:40
  • Total number of ballasts:40
  • Temperature sensors:1 (main)
  • Alarm contacts NO/NC:-
  • External Contactor Modules (ECM):-
  • Warrenty:3 years

 

Write an online review and share your thoughts with other shoppers!

Be the first to review this product